Short answer
In Greensboro, the 2025 Cost vs Value report lists a vinyl siding replacement at $14,171 and fiber cement at $17,285. Either way, the old siding comes off down to the sheathing, which is when we replace soft wood, wrap the house and flash the windows and doors properly.
Siding is the outer layer of a system. Behind it sit the water-resistive barrier, the flashing at windows and doors, and the sheathing. When siding fails, the damage that matters is usually behind it, where water has worked into sheathing and framing and stayed there long enough to start rotting the wood.
We strip the walls, inspect the sheathing, replace what's soft, wrap the house and flash every opening before any new siding goes on. Then we settle the trim, soffit and fascia, which often need replacing at the same time and cost less to do while the ladders and staging are already up.
What moves the price of siding replacement
Greensboro has Cost vs Value job costs for vinyl and fiber cement, and national data fills in the range.
- Material Fiber cement and wood cost more than vinyl to buy and install.
- Wall area and stories Two-story walls need more staging and labor.
- Sheathing repair Soft sheathing found after stripping is replaced before wrap.
- Trim and soffit Replacing fascia, soffit and window trim adds material and time.
| What the figure covers | Published range | Source |
|---|---|---|
| Vinyl siding replacement, Greensboro | $14,171 (job cost); 100.9% recouped | 2025 Cost vs. Value Report - Greensboro, NC (JLC / Zonda) |
| Fiber-cement siding replacement, Greensboro | $17,285 (job cost); 132.6% recouped | 2025 Cost vs. Value Report - Greensboro, NC (JLC / Zonda) |
| Siding replacement (national) | $5,554 to $17,720; average $11,589 | How Much Does Siding Replacement Cost? - HomeAdvisor |
Published figures are averages from the sources named, not a quote. Your price comes after the walk-through.
Vinyl, fiber cement or wood: comparing siding
| Siding | Greensboro job cost, 2025 Cost vs Value | Upkeep |
|---|---|---|
| Vinyl | $14,171 | Washing, no painting |
| Fiber cement | $17,285 | Repainting on a long cycle |
| Wood | No Greensboro figure published | Regular painting and board repair |
Vinyl siding hung the right way
Vinyl costs less and never needs paint. It also expands and contracts with temperature, so it has to hang loosely on nails driven with room to slide, not tight. Nailed tight, it buckles and waves in summer heat. Thicker panels lie flatter on the wall and stand up better to wind and impact, and insulated vinyl adds a foam backer behind each course. The 2025 Cost vs Value report lists a Greensboro vinyl siding replacement at $14,171, recouping 100.9 percent at resale.
Fiber-cement siding and its paint
Fiber cement looks like painted wood, resists rot and insects, and holds paint well. It's heavier than vinyl and has to be cut outdoors with dust control. Pre-finished boards come with factory paint; primed boards get painted on site after install. We hold the bottom edge off roofs and the ground by the gaps the manufacturer specifies, since that's where it can wick water. The 2025 Cost vs Value report lists a Greensboro fiber-cement job at $17,285, recouping 132.6 percent.
Wood siding in Greensboro's historic districts
In College Hill, Fisher Park and Dunleath, exterior work needs the city's historic design approval first, and its guidelines prefer repairing original materials, with rotted siding replaced in kind, wood for wood. Fiber cement and PVC aren't recommended there. So we remove only the damaged boards, source or mill the same profile, prime every face including the back, and blend the repair into the original wall so it disappears once painted. Our historic districts guide covers the approval steps and timing.
Trim, soffit and fascia that rot first
Fascia and soffit usually rot before the siding does, especially behind gutters that overflow. We replace rotted fascia with PVC or primed wood, add vented soffit so the attic can breathe in summer, and replace window and corner trim. Drip edge at the roof and kickout flashing where a roof meets a wall stop two common sources of rot. HomeAdvisor's national range for whole-house siding replacement is $5,554 to $17,720, and trim work often rides along with it on older houses.
Call (336) 347-1995Want someone to look at your room? The phone is answered around the clock.
Remodeling this in Greensboro houses
Greensboro's weather keeps siding moving. NOAA engineering data for the city lists a summer cooling design temperature of 93 F and a winter heating design of 14 F, and vinyl expands and shrinks across that whole swing, which is why we hang it loose. Winter brings a second test, since cold-air damming can bring freezing rain that's often a bigger concern here than snow. Ice in gutters and along roof edges backs water up behind trim, so we flash those spots before siding goes back on.
Signs it is time to call
- Warped or buckled panelsVinyl that waves was nailed too tight or has been heated by reflected sun.
- Soft or split boardsWood that gives under a thumb or has open splits is letting water in.
- Gaps at windows and cornersOpen joints at trim let water reach the sheathing.
- Stains below lapsDark streaks under siding courses point to trapped water.
How we run the job, step by step
- Walk the houseWe check siding, trim and any soft spots from the ground and ladders.
- Choose material and trimYou pick siding, color and trim before we order.
- Strip the wallsOld siding comes off one wall at a time.
- Repair, wrap and flashSoft sheathing is replaced, then wrap and flashing go on.
- Install and finishSiding, trim, soffit and fascia go up, and we clean up nails daily.